The national average cost of concrete installation ranges between roughly $3 and $10 per squarefoot (or $109 and $159 per cubic yard). Multiple factors go into concrete prices, including the size of the area you want to cover and the concrete thickness. Where you live can also impact the final installation cost.
Whether you plan to install, repair or remodel a driveway, patio, retaining wall or any other type of concrete structure or surface, keep reading to learn more about prices — and how to get cost estimates fromlocal prosnearyou.
What’s in this concrete cost guide?
- Slab cost per square foot
- Cost per yard
- Concrete prices for popular projects
- Patio
- Driveway
- Resurfacing
- Foundation
- Steps
- Removal
- Concrete cost factors
- Hiring tips
- Find a concrete contractor near you
- FAQs
While concrete is typically measured in cubic yards, installing it costs between $3 and $10 per square foot. Here’s the average total cost of pouring concrete, depending on the total square footage of the area:
Concrete costs:
0-500 square foot. | $2,417 |
500-1,000 square foot | $5,318 |
1,000-1,500 square foot | $5,747 |
1,500-2,000 square foot | $6,487 |
2,000-2,500 square foot | $10,022 |
2,500-3,000 square foot | $12,240 |
3,000-15,000 square foot | $15,046 |
Compare prices from concrete specialists near you.
Please enter a valid zip code
Assuming you’re paying an average of $6.50 per square foot for a concrete slab, here are approximate costs for installation:
Size (in feet) | Total square footage | Estimated cost |
8 x 8 | 64 | $416 |
10 x 10 | 100 | $650 |
12 x 12 | 144 | $936 |
20 x 20 | 400 | $2,600 |
24 x 24 | 576 | $3,744 |
30 x 20 | 600 | $3,900 |
30 x 40 | 1,200 | $7,800 |
40 x 50 | 2,000 | $13,000 |
The average cost to install ready-mix concrete that's being delivered by truck ranges from $109 and $159 per cubic yard(assuming delivery up to 20 miles).
When concrete is poured to create a slab, depth is also a factor, in addition to the square footage. To calculate the cost in cubic yards, you’ll have to:
- First, multiply the length by the width (the total square footage) by the depth in feet.
- Then, divide that number by 27, the total number of cubic feet in a cubic yard.
- Add about 5% to 10% to the cubic yard in case of spilling and waste.
Concrete has a variety of uses in home improvement projects and additions, including patios, driveways and garage floors. To help you get a better understanding of prices for your project, here are the average costs of installing concrete patios, concrete driveways, foundations and more:
$2,500-$7,000 | |
$3,500- $15,000 | |
$3-$10 per square foot | |
$1,200-$15,000 | |
$100-$300 per hour (typically less than $500) | |
$500-$1,800 |
Find the best concrete specialist in your neighborhood.
Please enter a valid zip code
Multiple factors go into calculating the cost of installing concrete. From size and thickness to stamping and reinforcement, here are some factors to consider when planning your project:
Concrete delivery cost
If you’re ordering concrete to be delivered to your home, ask about delivery fees and what can impact those fees. Will accessibility drive fees up or down?
Grading
If the ground is not level for your concrete, you may need to add in or remove a significant amount of soil to ensure the slab is level when it’s complete. Grading could require additional labor, equipment and fees for digging and hauling material.
Base
Some projects will require a base of gravel or crushed stone layered below the slab to strengthen it and add reinforcement against cracking. Laying a base could add additional fees for material, labor and delivery.
Thickness
While the standard thickness of a concrete slab is 4 inches, your project might require greater depth for a stronger slab, like for a building foundation. A greater thickness will likely raise the cost.
Stamped concrete
If you’re planning on a specialized finish, like stamped concrete, this will likely cost you extra as more hand-applied work will be required to finish the surface.
For example, let's say you're thinking about stamping the concrete patio you plan to install in your yard. According to some experts, this could actually double yourpatio installation costs. But the costs may be worth the benefits if you desire a patio that looks like brick, stone, wood or even tile. Also, if you're thinking about installing a stamped concrete driveway, be prepared for prices to increase by$12 to $18 per square foot.
Additives
Additives (or admixtures) can help strengthen the concrete, maintain its quality, reduce moisture and reduce production costs, according to thePortland Cement Association.
Reinforcement
Some type of reinforcement — like steel reinforcing bars (rebar) or wire mesh — is sometimes recommended because it can strengthen a concrete slab and prevent cracking. It could also add to the final cost of your project. Chat with your contractor to determine if your project requires reinforcement.
Precast vs. cast in place
Many residential and commercial projects — buildings, parking garages, roof tiles, concrete pavers, fire pits and more — utilize precast concrete and cast-in-place (CIP) concrete. Precast concrete is cast into a specific mold or shape and then sent to the job site, whereas CIP concrete is poured and molded at the job site.
The cost to install CIP concrete is typically less than precast concrete, but the National Precast Concrete Associationstatesthat the total cost of ownership is actually lowerfor precast concrete.
Concrete removal cost
Are you replacing a concrete driveway, patio or other structures? If so, you might need tocalculate the priceof removing and hauling away the old slabs (if they're no longer usable for your new project). On average, customers pay $500 to $1,800 in removal costs.
Search local concrete specialists and check prices.
Please enter a valid zip code
Here are a few steps you should take before hiring a contractor:
Read reviews
Go online tofind contractors in your area, and look for their customer reviews and testimonials. Read what other customers had to say about the contractor’s services. Were the prices fair? Was the work done correctly and on time? Keep track of which pros have consistently favorable reviews.
Ask questions
When you’re analyzing and comparing concrete contractors, write a list of questions to ask each one, such as:
- Ask about their experience
- Find out the estimated time frame and what hours they can work.
- Inquire if there are any additional costs, like delivery fees.
- If you’re looking for custom work, like stamped concrete, find out if that's a service they provide.
You should also find out if there are ways you can save money on your project. For example, ask about the materials the contractor recommends to save money without sacrificing quality.
Give details
Be prepared to tell the contractor the dimensions of the area you want to cover and details about the project. A concrete sidewalk is a very different job than a pool deck, so the more information you give, the more accurate your initial estimate.
Check licenses and credentials
Before hiring anyone, research the licensing requirements in your state. In some states, you’ll want to make sure the pro has a concrete contracting license.
Get free estimates
When you reach out to a pro, ask if they will provide a free estimate. It can be helpful to get estimates from two or three contractors before you choose one. That way, you’ll be able to compare the project cost and ensure you’re getting the best price.
Every concrete project is different depending on the amount of labor you need, the state of your soil and your design choices — there is no one-size-fits-all price. If you need help planning your project and estimating prices, reach out to severallocal concrete contractors on Thumbtacktoday.
Get a free estimate from a great concrete specialist near you.
Please enter a valid zip code
FAQs
How much concrete do I need for a 10x10 slab?
For a 10x10 slab of concrete that's 4-inches thick, you'll need approximately1.23 yards of concrete.
How many yards of concrete do I need for a 12x12 slab?
A 12x12 slab of concrete that's 4-inches thick requires1.78 yards of concrete.
How many yards of concrete do I need for a 24x24 x4 slab?
You'll need7.11 yards of concrete for a24x24 x4 slab.
How much does it cost per square foot to pour concrete?
It costs approximately $3-$10 per squarefoot to pour concrete.
How much does it cost to pour a 20x30 slab?
Pouring a20x30 slab of concrete costs approximately $3,900.
Is it cheaper to pour your own concrete?
In most cases, pouring your own concrete is cheaper than hiring a professional to do it for you. However, you should take experience, skill and time into account before you DIY this project. Pouring and mixing concrete requires using theright ratio. If you're not familiar with pouring concrete, you may be better off hiring a pro.
Is it cheaper to mix your own concrete?
You might be able to save money by mixing it yourself — but you have to know what you’re doing. Mixing concrete in big batches requires heavy equipment, specialized tools (like concrete forms) and significant experience. However, there are small repair projects a seasoned DIYer should be able to manage using ready-mix concrete. These projects might include patching or resurfacing a worn or pitted slab.
Can you pour concrete directly on dirt?
Yes, it can be poured directly over soil. However, it’s vital to ensure that the installation area is level and prepped to avoid ending up with shifting or cracks in the concrete slabs.
Do I need gravel under concrete?
While concrete can be poured directly over dirt, adding a layer of gravel underneath can help stabilize your base to provide even support. Without this extra step, you may end up with a concrete slab that shifts or sinks over time.
What is the best base for concrete?
It depends on the soil in your area. If you have a good solid, undisturbed ground underneath, you may not need anything more. If your soil is unstable or does not drain well, a pro can use gravel or crushed stone to create a base. Crushed stone provides drainage for moisture that accumulates and prevents cracks by alleviating tension caused by the concrete’s expansion and contraction over time. You can also ask your contractor about installing a vapor barrier below the concrete slab if you’re concerned about moisture.
What is the difference between a concrete slab and a cement slab?
The two terms are often used interchangeably, making things a little confusing, but cement is actually an ingredient in concrete. Concrete is a mixture of sand, gravel or crushed stone, water and cement.
In reality, there’s no such thing as a "cement mixer" or a "cement sidewalk." Instead, the correct terms are "concrete mixer" and "concrete sidewalk," according to thePortland Cement Association.
How thick should a concrete slab be?
A concrete slab's ideal thickness will depend on how it is being utilized. The standard thickness in the U.S. ranges from 4 inches (which is often recommended for driveways) to 6 inches. The thicker the slab, the stronger it will be.Talk to a concrete contractorto determine how thick your concrete slabs should be.
Additional sources: National Repair and Remodeling Estimator.